testevdev: Add some EVIOCGNAME and USB name strings to test data

We don't currently use these for anything, but we might start using
them as input to our heuristics as part of #7697.

Signed-off-by: Simon McVittie <smcv@collabora.com>

test/testevdev.c

@@ -60,6 +60,9 @@ static const struct
 typedef struct
 {
     const char *name;
+    const char *eviocgname;
+    const char *usb_vendor_name;
+    const char *usb_product_name;
     uint16_t bus_type;
     uint16_t vendor_id;
     uint16_t product_id;
@@ -275,11 +278,15 @@ static const GuessTest guess_tests[] =
 {
     {
       .name = "Xbox 360 wired USB controller",
+      .eviocgname = "Microsoft X-Box 360 pad",
+      .usb_vendor_name = "©Microsoft Corporation",
+      .usb_product_name = "Controller",
       /* 8BitDo N30 Pro 2 v0114 via USB-C (with the xpad driver) is
        * reported as 0003:045e:028e v0114, and is functionally equivalent */
       .bus_type = 0x0003,
       .vendor_id = 0x045e,
       .product_id = 0x028e,
+      .version = 0x0114,
       .expected = SDL_UDEV_DEVICE_JOYSTICK,
       /* SYN, KEY, ABS, FF */
       .ev = { 0x0b, 0x00, 0x20 },
@@ -420,8 +427,11 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "DualSense (PS5) v8111 - gamepad",
-      /* Same physical device via Bluetooth is 0005:054c:0ce6 v8100,
-       * but otherwise equivalent */
+      .eviocgname = "Sony Interactive Entertainment Wireless Controller",
+      .usb_vendor_name = "Sony Interactive Entertainment",
+      .usb_product_name = "Wireless Controller",
+      /* Same physical device via Bluetooth is 0005:054c:0ce6 v8100
+       * and EVIOCGNAME is just "Wireless Controller", otherwise equivalent */
       .bus_type = 0x0003,
       .vendor_id = 0x054c,
       .product_id = 0x0ce6,
@@ -440,6 +450,10 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "DualShock 4 - gamepad",
+      /* EVIOCGNAME is just "Wireless Controller" when seen via Bluetooth */
+      .eviocgname = "Sony Interactive Entertainment Wireless Controller",
+      .usb_vendor_name = "Sony Interactive Entertainment",
+      .usb_product_name = "Wireless Controller",
       /* Same physical device via Bluetooth is 0005:054c:09cc v8100,
        * but otherwise equivalent */
       .bus_type = 0x0003,
@@ -479,6 +493,10 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "DualShock 4 - touchpad",
+      /* EVIOCGNAME is just "Wireless Controller Touchpad" when seen via Bluetooth */
+      .eviocgname = "Sony Interactive Entertainment Wireless Controller Touchpad",
+      .usb_vendor_name = "Sony Interactive Entertainment",
+      .usb_product_name = "Wireless Controller",
       /* Same physical device via Bluetooth is 0005:054c:09cc v8100 and is
        * functionally equivalent. */
       /* DualSense (PS5), 0003:054c:0ce6 v8111, is functionally equivalent.
@@ -505,6 +523,10 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "DualShock 4 - accelerometer",
+      /* EVIOCGNAME is just "Wireless Controller Motion Sensors" when seen via Bluetooth */
+      .eviocgname = "Sony Interactive Entertainment Wireless Controller Motion Sensors",
+      .usb_vendor_name = "Sony Interactive Entertainment",
+      .usb_product_name = "Wireless Controller",
       /* Same physical device via Bluetooth is 0005:054c:09cc v8100 and is
        * functionally equivalent. */
       /* DualSense (PS5), 0003:054c:0ce6 v8111, is functionally equivalent.
@@ -542,9 +564,13 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "DualShock 3 - gamepad",
+      .eviocgname = "Sony PLAYSTATION(R)3 Controller",
+      .usb_vendor_name = "Sony",
+      .usb_product_name = "PLAYSTATION(R)3 Controller",
       .bus_type = 0x0003,
       .vendor_id = 0x054c,
       .product_id = 0x0268,
+      .version = 0x8111,
       .expected = SDL_UDEV_DEVICE_JOYSTICK,
       /* SYN, KEY, ABS, MSC, FF */
       .ev = { 0x1b, 0x00, 0x20 },
@@ -566,6 +592,9 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "DualShock 3 - accelerometer",
+      .eviocgname = "Sony PLAYSTATION(R)3 Controller Motion Sensors",
+      .usb_vendor_name = "Sony",
+      .usb_product_name = "PLAYSTATION(R)3 Controller",
       .bus_type = 0x0003,
       .vendor_id = 0x054c,
       .product_id = 0x0268,
@@ -715,6 +744,7 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "8BitDo SNES30 v0100 via Bluetooth",
+      .eviocgname = "8Bitdo SNES30 GamePad",
       /* The same physical device via USB, 0003:2dc8:ab20 v0110,
        * is reported differently (above). */
       /* 8BitDo NES30 Pro (aka N30 Pro) via Bluetooth, 0005:2dc8:3820 v0100,
@@ -896,6 +926,7 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "Switch Pro Controller via Bluetooth (Linux 6.2.11)",
+      .eviocgname = "Pro Controller",
       .bus_type = 0x0005,
       .vendor_id = 0x057e,
       .product_id = 0x2009,
@@ -914,6 +945,9 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "Switch Pro Controller via USB",
+      .eviocgname = "Nintendo Co., Ltd. Pro Controller",
+      .usb_vendor_name = "Nintendo Co., Ltd.",
+      .usb_product_name = "Pro Controller",
       .bus_type = 0x0003,
       .vendor_id = 0x057e,
       .product_id = 0x2009,
@@ -940,6 +974,7 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "NES Controller (R) NES-style Joycon from Nintendo Online",
+      .eviocgname = "NES Controller (R)",
       /* Joy-Con (L), 0005:057e:2006 v0001, is functionally equivalent.
        * Ordinary Joy-Con (R) and NES-style Joy-Con (L) are assumed to be
        * functionally equivalent as well. */
@@ -1086,8 +1121,13 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "Google Stadia Controller rev.A",
+      .eviocgname = "Google LLC Stadia Controller rev. A",
+      .usb_vendor_name = "Google LLC",
+      .usb_product_name = "Stadia Controller rev. A",
       /* This data is with USB-C, but the same physical device via Bluetooth,
-       * 0005:18d1:9400 v0000, is functionally equivalent */
+       * 0005:18d1:9400 v0000, is functionally equivalent other than having
+       * EVIOCGNAME = StadiaXXXX-YYYY where XXXX is the last 4 digits of
+       * the serial number and YYYY is some other mystery number */
       .bus_type = 0x0003,
       .vendor_id = 0x18d1,
       .product_id = 0x9400,
@@ -1117,6 +1157,9 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "Microsoft Xbox Series S|X Controller (model 1914) via USB",
+      .eviocgname = "Microsoft Xbox Series S|X Controller",
+      .usb_vendor_name = "Microsoft",
+      .usb_product_name = "Controller",
       /* Physically the same device as 0003:045e:0b13 v0515 below,
        * but some functionality is mapped differently */
       .bus_type = 0x0003,
@@ -1139,6 +1182,7 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "Microsoft Xbox Series S|X Controller (model 1914) via Bluetooth",
+      .eviocgname = "Xbox Wireless Controller",
       /* Physically the same device as 0003:045e:0b12 v050f above,
        * but some functionality is mapped differently */
       .bus_type = 0x0005,
@@ -1162,6 +1206,7 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "Wiimote - buttons",
+      .eviocgname = "Nintendo Wii Remote",
       .bus_type = 0x0005,
       .vendor_id = 0x057e,
       .product_id = 0x0306,
@@ -1187,12 +1232,8 @@ static const GuessTest guess_tests[] =
       },
     },
     {
-      /* The accelerometer and the Motion Plus gyro report as the same
-       * vendor, product, version and axes, just with different
-       * min/max/fuzz/flat parameters (not shown here). A Wiimote with an
-       * attached Motion Plus reports the accelerometer and gyro as separate
-       * evdev devices. */
-      .name = "Wiimote - Motion Plus or accelerometer",
+      .name = "Wiimote - accelerometer",
+      .eviocgname = "Nintendo Wii Remote Accelerometer",
       .bus_type = 0x0005,
       .vendor_id = 0x057e,
       .product_id = 0x0306,
@@ -1200,12 +1241,27 @@ static const GuessTest guess_tests[] =
       .expected = SDL_UDEV_DEVICE_ACCELEROMETER,
       /* SYN, ABS */
       .ev = { 0x09 },
-      /* RX, RY, RZ - even for the accelerometer, which would more
-       * conventionally be X, Y, Z */
+      /* RX, RY, RZ - even though it would more conventionally be X, Y, Z */
+      .abs = { 0x38 },
+    },
+    {
+      .name = "Wiimote - Motion Plus gyroscope",
+      .eviocgname = "Nintendo Wii Remote Motion Plus",
+      /* Note that if we only look at the bus type, vendor, product, version
+       * and axes, this is indistinguishable from the accelerometer */
+      .bus_type = 0x0005,
+      .vendor_id = 0x057e,
+      .product_id = 0x0306,
+      .version = 0x0600,
+      .expected = SDL_UDEV_DEVICE_ACCELEROMETER,
+      /* SYN, ABS */
+      .ev = { 0x09 },
+      /* RX, RY, RZ */
       .abs = { 0x38 },
     },
     {
       .name = "Wiimote - IR positioning",
+      .eviocgname = "Nintendo Wii Remote IR",
       .bus_type = 0x0005,
       .vendor_id = 0x057e,
       .product_id = 0x0306,
@@ -1218,6 +1274,7 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "Wiimote - Nunchuck",
+      .eviocgname = "Nintendo Wii Remote Nunchuk",
       .bus_type = 0x0005,
       .vendor_id = 0x057e,
       .product_id = 0x0306,
@@ -1238,6 +1295,7 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "Wiimote - Classic Controller",
+      .eviocgname = "Nintendo Wii Remote Classic Controller",
       /* TODO: Should this be JOYSTICK, or maybe JOYSTICK|KEYBOARD?
        * It's unusual in the same ways as the Wiimote */
       .expected = SDL_UDEV_DEVICE_KEYBOARD,
@@ -1297,6 +1355,7 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "Synaptics TM3381-002 (Thinkpad X280 trackpad)",
+      .eviocgname = "Synaptics TM3381-002",
       .bus_type = 0x001d,   /* BUS_RMI */
       .vendor_id = 0x06cb,
       .product_id = 0x0000,
@@ -1338,6 +1397,7 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "TPPS/2 Elan TrackPoint (Thinkpad X280)",
+      .eviocgname = "TPPS/2 Elan TrackPoint",
       .bus_type = 0x0011,   /* BUS_I8042 */
       .vendor_id = 0x0002,
       .product_id = 0x000a,
@@ -1357,6 +1417,11 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "Thinkpad ACPI buttons",
+      .eviocgname = "ThinkPad Extra Buttons",
+      .bus_type = 0x0019,
+      .vendor_id = 0x17aa,
+      .product_id = 0x5054,
+      .version = 0x4101,
       /* SDL treats this as a keyboard because it has a power button */
       .expected = SDL_UDEV_DEVICE_KEYBOARD,
       /* SYN, KEY, MSC, SW */
@@ -1376,6 +1441,7 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "PC speaker",
+      .eviocgname = "PC Speaker",
       .bus_type = 0x0010,   /* BUS_ISA */
       .vendor_id = 0x001f,
       .product_id = 0x0001,
@@ -1386,6 +1452,11 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "ALSA headphone detection, etc.",
+      .eviocgname = "HDA Intel PCH Mic",
+      /* HDA Intel PCH Headphone is functionally equivalent */
+      /* HDA Intel PCH HDMI/DP,pcm=3 is functionally equivalent */
+      /* HDA Intel PCH HDMI/DP,pcm=7 is functionally equivalent */
+      /* HDA Intel PCH HDMI/DP,pcm=8 is functionally equivalent */
       .bus_type = 0x0000,
       .vendor_id = 0x0000,
       .product_id = 0x0000,
@@ -1397,6 +1468,7 @@ static const GuessTest guess_tests[] =
     {
       /* Assumed to be a reasonably typical i8042 (PC AT) keyboard */
       .name = "Thinkpad T520 and X280 keyboards",
+      .eviocgname = "AT Translated Set 2 keyboard",
       .bus_type = 0x0011,   /* BUS_I8042 */
       .vendor_id = 0x0001,
       .product_id = 0x0001,
@@ -1413,6 +1485,7 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "Thinkpad X280 sleep button",
+      .eviocgname = "Sleep Button",
       .bus_type = 0x0019,   /* BUS_HOST */
       .vendor_id = 0x0000,
       .product_id = 0x0003,
@@ -1430,6 +1503,7 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "Thinkpad X280 lid switch",
+      .eviocgname = "Lid Switch",
       .bus_type = 0x0019,   /* BUS_HOST */
       .vendor_id = 0x0000,
       .product_id = 0x0005,
@@ -1440,6 +1514,7 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "Thinkpad X280 power button",
+      .eviocgname = "Power Button",
       .bus_type = 0x0019,   /* BUS_HOST */
       .vendor_id = 0x0000,
       .product_id = 0x0001,
@@ -1456,6 +1531,7 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "Thinkpad X280 video bus",
+      .eviocgname = "Video Bus",
       .bus_type = 0x0019,   /* BUS_HOST */
       .vendor_id = 0x0000,
       .product_id = 0x0006,
@@ -1496,6 +1572,9 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "Thinkpad USB keyboard with Trackpoint - keyboard",
+      .eviocgname = "Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint",
+      .usb_vendor_name = "Lite-On Technology Corp.",
+      .usb_product_name = "ThinkPad USB Keyboard with TrackPoint",
       .bus_type = 0x0003,
       .vendor_id = 0x17ef,
       .product_id = 0x6009,
@@ -1513,9 +1592,13 @@ static const GuessTest guess_tests[] =
     },
     {
       .name = "Thinkpad USB keyboard with Trackpoint - Trackpoint",
+      .eviocgname = "Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint",
+      .usb_vendor_name = "Lite-On Technology Corp.",
+      .usb_product_name = "ThinkPad USB Keyboard with TrackPoint",
       .bus_type = 0x0003,
       .vendor_id = 0x17ef,
       .product_id = 0x6009,
+      .version = 0x0110,
       /* For some reason the special keys like mute and wlan toggle
        * show up here instead of, or in addition to, as part of
        * the keyboard - so both udev and SDL report this as having keys too. */