|
@@ -44,33 +44,23 @@
|
|
|
#define CONTROLLER_PREPARE_INPUT_TIMEOUT_MS 50
|
|
|
|
|
|
|
|
|
-/* Connect controller */
|
|
|
+/* Start controller */
|
|
|
static const Uint8 xboxone_init0[] = {
|
|
|
- 0x04, 0x20, 0x00, 0x00
|
|
|
-};
|
|
|
-/* Start controller - extended? */
|
|
|
-static const Uint8 xboxone_init1[] = {
|
|
|
- 0x05, 0x20, 0x00, 0x0F, 0x06, 0x00, 0x00, 0x00,
|
|
|
- 0x00, 0x00, 0x00, 0x55, 0x53, 0x00, 0x00, 0x00,
|
|
|
- 0x00, 0x00, 0x00
|
|
|
-};
|
|
|
-/* Start controller with input */
|
|
|
-static const Uint8 xboxone_init2[] = {
|
|
|
0x05, 0x20, 0x03, 0x01, 0x00
|
|
|
};
|
|
|
/* Enable LED */
|
|
|
-static const Uint8 xboxone_init3[] = {
|
|
|
+static const Uint8 xboxone_init1[] = {
|
|
|
0x0A, 0x20, 0x00, 0x03, 0x00, 0x01, 0x14
|
|
|
};
|
|
|
-/* Start input reports? */
|
|
|
-static const Uint8 xboxone_init4[] = {
|
|
|
- 0x06, 0x20, 0x00, 0x02, 0x01, 0x00
|
|
|
-};
|
|
|
-/* Start rumble? */
|
|
|
-static const Uint8 xboxone_init5[] = {
|
|
|
+/* Setup rumble (not needed for Microsoft controllers, but it doesn't hurt) */
|
|
|
+static const Uint8 xboxone_init2[] = {
|
|
|
0x09, 0x00, 0x00, 0x09, 0x00, 0x0F, 0x00, 0x00,
|
|
|
0x00, 0x00, 0xFF, 0x00, 0xEB
|
|
|
};
|
|
|
+/* This controller passed security check */
|
|
|
+static const Uint8 security_passed_packet[] = {
|
|
|
+ 0x06, 0x20, 0x00, 0x02, 0x01, 0x00
|
|
|
+};
|
|
|
|
|
|
/*
|
|
|
* This specifies the selection of init packets that a gamepad
|
|
@@ -90,16 +80,11 @@ typedef struct {
|
|
|
|
|
|
|
|
|
static const SDL_DriverXboxOne_InitPacket xboxone_init_packets[] = {
|
|
|
- { 0x0000, 0x0000, 0x0000, 0x0000, xboxone_init0, sizeof(xboxone_init0), { 0x04, 0xb0 } },
|
|
|
+ /* The PDP Rock Candy controller doesn't start sending input until it gets this packet */
|
|
|
+ { 0x0e6f, 0x0246, 0x0000, 0x0000, security_passed_packet, sizeof(security_passed_packet), { 0x00, 0x00 } },
|
|
|
+ { 0x0000, 0x0000, 0x0000, 0x0000, xboxone_init0, sizeof(xboxone_init0), { 0x00, 0x00 } },
|
|
|
{ 0x0000, 0x0000, 0x0000, 0x0000, xboxone_init1, sizeof(xboxone_init1), { 0x00, 0x00 } },
|
|
|
{ 0x0000, 0x0000, 0x0000, 0x0000, xboxone_init2, sizeof(xboxone_init2), { 0x00, 0x00 } },
|
|
|
- { 0x0000, 0x0000, 0x0000, 0x0000, xboxone_init3, sizeof(xboxone_init3), { 0x00, 0x00 } },
|
|
|
-
|
|
|
- /* These next packets are required for third party controllers (PowerA, PDP, HORI),
|
|
|
- but aren't the correct protocol for Microsoft Xbox controllers.
|
|
|
- */
|
|
|
- { 0x0000, 0x0000, 0x045e, 0x0000, xboxone_init4, sizeof(xboxone_init4), { 0x00, 0x00 } },
|
|
|
- { 0x0000, 0x0000, 0x045e, 0x0000, xboxone_init5, sizeof(xboxone_init5), { 0x00, 0x00 } },
|
|
|
};
|
|
|
|
|
|
typedef enum {
|
|
@@ -185,7 +170,10 @@ SendAckIfNeeded(SDL_HIDAPI_Device *device, Uint8 *data, int size)
|
|
|
#ifdef DEBUG_XBOX_PROTOCOL
|
|
|
HIDAPI_DumpPacket("Xbox One sending ACK packet: size = %d", ack_packet, sizeof(ack_packet));
|
|
|
#endif
|
|
|
- hid_write(device->dev, ack_packet, sizeof(ack_packet));
|
|
|
+ if (SDL_HIDAPI_LockRumble() < 0 ||
|
|
|
+ SDL_HIDAPI_SendRumbleAndUnlock(device, ack_packet, sizeof(ack_packet)) != sizeof(ack_packet)) {
|
|
|
+ SDL_SetError("Couldn't send ack packet");
|
|
|
+ }
|
|
|
}
|
|
|
#endif /* __WIN32__ */
|
|
|
}
|
|
@@ -633,6 +621,14 @@ HIDAPI_DriverXboxOne_HandleStatePacket(SDL_Joystick *joystick, SDL_DriverXboxOne
|
|
|
SDL_memcpy(ctx->last_state, data, SDL_min(size, sizeof(ctx->last_state)));
|
|
|
}
|
|
|
|
|
|
+static void
|
|
|
+HIDAPI_DriverXboxOne_HandleStatusPacket(SDL_Joystick *joystick, SDL_DriverXboxOne_Context *ctx, Uint8 *data, int size)
|
|
|
+{
|
|
|
+ if (ctx->init_state < XBOX_ONE_INIT_STATE_COMPLETE) {
|
|
|
+ SetInitState(ctx, XBOX_ONE_INIT_STATE_COMPLETE);
|
|
|
+ }
|
|
|
+}
|
|
|
+
|
|
|
static void
|
|
|
HIDAPI_DriverXboxOne_HandleModePacket(SDL_Joystick *joystick, SDL_DriverXboxOne_Context *ctx, Uint8 *data, int size)
|
|
|
{
|
|
@@ -1000,16 +996,18 @@ HIDAPI_DriverXboxOne_UpdateJoystick(SDL_HIDAPI_Device *device, SDL_Joystick *joy
|
|
|
is firmware version 5.5.2641.0, and product version 0x0505 = 1285
|
|
|
then 8 bytes of unknown data
|
|
|
*/
|
|
|
+ if (data[1] == 0x20) {
|
|
|
#ifdef DEBUG_JOYSTICK
|
|
|
- SDL_Log("Controller announce after %u ms\n", (SDL_GetTicks() - ctx->start_time));
|
|
|
+ SDL_Log("Controller announce after %u ms\n", (SDL_GetTicks() - ctx->start_time));
|
|
|
#endif
|
|
|
- SetInitState(ctx, XBOX_ONE_INIT_STATE_START_NEGOTIATING);
|
|
|
+ SetInitState(ctx, XBOX_ONE_INIT_STATE_START_NEGOTIATING);
|
|
|
+ } else {
|
|
|
+ /* Possibly an announce from a device plugged into the controller */
|
|
|
+ }
|
|
|
break;
|
|
|
case 0x03:
|
|
|
- /* Controller heartbeat */
|
|
|
- if (ctx->init_state < XBOX_ONE_INIT_STATE_COMPLETE) {
|
|
|
- SetInitState(ctx, XBOX_ONE_INIT_STATE_COMPLETE);
|
|
|
- }
|
|
|
+ /* Controller status update */
|
|
|
+ HIDAPI_DriverXboxOne_HandleStatusPacket(joystick, ctx, data, size);
|
|
|
break;
|
|
|
case 0x04:
|
|
|
/* Unknown chatty controller information, sent by both sides */
|