mirror of
https://github.com/NixOS/nixos-hardware.git
synced 2025-11-04 09:17:14 +08:00
99 lines
3.4 KiB
Markdown
99 lines
3.4 KiB
Markdown
> **NOTE**: This is an attempt to port [samueldr](https://github.com/samueldr/)'s [wip-pinebookpro](https://github.com/samueldr/wip-pinebook-pro) to [nixos-hardware](https://github.com/NixOS/nixos-hardware). Credit for the work done goes to the original authors.
|
|
|
|
## Using in your configuration
|
|
|
|
To use this configuration simply add this module to your configuration.
|
|
|
|
```nix
|
|
{
|
|
imports = [
|
|
${nixos-hardware}/pine64/pinebook-pro
|
|
];
|
|
}
|
|
```
|
|
|
|
That entry point will try to maximize the hardware compatibility.
|
|
|
|
## Current state
|
|
|
|
Currently everything seems to work but this is not guaranteed it will be forever.
|
|
|
|
### Kernel
|
|
|
|
By default this uses the latest upstream kernel but the overlay makes available `pinebookpro-unstable-manjaro-kernel`
|
|
which is built from a pinned kernel version and makes available the DP alt mode over Type-C.
|
|
This kernel is unstable and some sporadic kernel panics may occur, use at your own risk.
|
|
|
|
### Known issues
|
|
|
|
#### HDMI over Type-C
|
|
|
|
HDMI over Type-C works only for the custom kernel and the audio dosen't work (it's an upstream problem).
|
|
|
|
#### `rockchipdrm` and `efifb`
|
|
|
|
This can be worked around by booting with the `efifb=off` kernel command-line.
|
|
|
|
This is already handled for you by this configuration. If using the generic
|
|
UEFI AArch64 iso, you will need to add the option yourself to the command-line
|
|
using GRUB.
|
|
|
|
#### _EFI_ and poweroff
|
|
|
|
When booted using EFI, the system will not power off. It will stay seemingly
|
|
stuck with the LED and display turned off.
|
|
|
|
A [workaround exists](https://github.com/Tow-Boot/Tow-Boot/commit/818cae1b84a7702f2a509927f2819900c2881979#diff-20f50d9d8d5d6c059b87ad66fbc5df26d9fc46251763547ca9bdcc75564a4368),
|
|
and is built in recent Tow-Boot (make sure your release is 2021.10-004 or more recent).
|
|
|
|
### _Tow-Boot_
|
|
|
|
We highly suggest installing _Tow-Boot_ to the SPI Flash.
|
|
|
|
- https://github.com/Tow-Boot/Tow-Boot
|
|
|
|
Having the firmware installed to SPI makes the device act basically like a
|
|
normal computer. No need for weird incantations to setup the platform boot
|
|
firmware.
|
|
|
|
Alternatively, starting from the _Tow-Boot_ disk image on eMMC is easier to
|
|
deal with and understand than having to deal with _U-Boot_ manually.
|
|
|
|
### Mainline _U-Boot_
|
|
|
|
Mainline U-Boot has full support for graphics since 2021.04. The current
|
|
unstable relases of Nixpkgs are at 2021.04 at least.
|
|
|
|
```
|
|
$ nix-build -A pkgs.ubootPinebookPro
|
|
```
|
|
|
|
Note that the default U-Boot build does not do anything with LED on startup.
|
|
|
|
## Keyboard firmware
|
|
|
|
> **WARNING**: Some hardware batches for the Pinebook Pro ship with the
|
|
> wrong chip for the keyboard controller. While it will work with the
|
|
> firmware it ships with, it _may brick_ while flashing the updated
|
|
> firmware. [See this comment on the firmware repository](https://github.com/jackhumbert/pinebook-pro-keyboard-updater/issues/33#issuecomment-850889285).
|
|
>
|
|
> It is unclear how to identify said hardware from a running system.
|
|
|
|
To determine which keyboard controller you have, you will need to disassemble
|
|
the Pinebook Pro as per [the Pine64
|
|
wiki](https://wiki.pine64.org/wiki/Pinebook_Pro#Keyboard), and make sure that
|
|
the IC next to the U23 marking on the main board is an **SH68F83**.
|
|
|
|
```sh
|
|
$ nix-build -A pkgs.pinebookpro-keyboard-updater
|
|
$ sudo ./result/bin/updater step-1 <iso|ansi>
|
|
$ sudo poweroff
|
|
# ...
|
|
$ sudo ./result/bin/updater step-2 <iso|ansi>
|
|
$ sudo poweroff
|
|
# ...
|
|
$ sudo ./result/bin/updater flash-kb-revised <iso|ansi>
|
|
```
|
|
|
|
Note: poweroff must be used, reboot does not turn the hardware "off" enough.
|